Windsor Sensor X15 Commerci...
$70.99
Product details
Part 5288BLU is the gray and blue plastic brush cover for the Windsor Sensor XP15 commercial upright, cross-referenced in specialist parts listings to original part number 8.613-878.0. It is the molded shield that closes over the brush chamber on the power head, keeping airflow channeled through the roller and keeping string, wire and larger debris from riding up into the housing.
A brush cover leads a rough life on a commercial machine. The front edge takes the knocks every time the nozzle runs into chair legs, door frames and shelving bases, and the mounting points flex a little on every roller service. The usual end is a cracked corner or a clip that no longer snaps home, and a cover that sits loose lets the power head bleed airflow at the seam while fine debris packs into places it should never reach. The gray and blue molding also matches the original Sensor color scheme, which keeps part identification simple across a mixed fleet.
One honest caution before ordering. Parts catalogs carry this SKU under conflicting descriptions, with some rows labeling it a bearing block for the Sensor X15 rather than a brush cover. The listings we were able to verify identify 5288BLU as the XP15 brush cover with the original part number above, so match the part against your machine's diagram, and against the piece you are removing, before you order.
- Part: 5288BLU, brush cover
- Original part number: 8.613-878.0
- Fits: Windsor Sensor XP15 commercial upright
- Material: gray and blue plastic
- Function: shields the brush housing and keeps airflow channeled through the roller
If your machine is an older Sensor rather than an XP15, or the cover you are holding does not match this description, check the parts diagram first. A cover that is close but not exact will not seat tight, and a loose seam costs suction the same way a cracked one does.