Sirena Canister Bottom Plate
$12.99
Product details
The bottom plate closes up the underside of the Sirena S10NA canister body, the panel that stands between the floor and everything mounted inside the machine. It spends its whole service life closest to the floor and takes knocks for the rest of the machine, which is why a sound, uncracked plate matters beyond looks.
Because it takes the weight of the machine and absorbs every bump when the canister gets dragged, kicked, or set down hard, this plate is a piece worth checking on any older S10NA. A split plate lets the machine rock on its base and can eventually let dust and moisture work into the cavity it is meant to close.
This is part 94S, made for the S10NA. Transfer any hardware or grommets from the old plate to the new one during installation, since those small pieces often outlast the plastic around them, and check the swap against the machine's parts diagram if your old plate differs from the one that arrives.
Because the S10NA is a water-filtration canister, a spill or overfill from the basin tends to find its way down to the bottom of the machine, so the area around this plate deserves a wipe-down and a look whenever the basin has been overfilled. With the old plate off, examine it under good light for hairline cracks that have not yet spread, since stress cracks in a load-bearing panel usually start small and grow a little with every knock the machine takes afterward.
- Part: 94S
- Fits: Sirena S10NA canister
- Function: underside panel that closes the canister body
- Replace when: cracking or a rocking base shows up