SEBO MultiCare Brush Roller...
$31.99
Product details
The BALANCE A1 was designed so the roller could be changed rather than compromised on, and 8815AM is the MultiCare one. SEBO gives it position 17 on the A1 parts diagram, immediately after the MicroCare roller at position 16.
Both rollers turn inside the power brush 95030AM, which the drawing shows at position 15, running against the right-hand bearing block 8802AM at position 7. Their job is mechanical rather than pneumatic: bristles knock grit loose and lift hair out of the pile so the airflow behind them has something to carry away. A roller past its working life still spins and still sounds correct, which is what makes the wear easy to miss — the giveaway is that a second pass over the same patch of carpet keeps producing dirt.
Ordering by part number is the only reliable route. The MultiCare and MicroCare rollers sit side by side on the drawing, look similar enough on a shelf to be confused, and are stocked under different numbers: 8815AM here, 8816AM for the MicroCare. Check the ends for wound hair whenever the roller is out, because a bound end loads the bearing block long before the bristles themselves give up.
A roller wears from two directions at once. Bristle tips shorten against the floor, and hair binds at the ends and works its way toward the bearing. Slit the wraps with a blade drawn along the roller, not across the rows, and the roller goes back with its full turning freedom. Anyone shopping for a BALANCE A1 MultiCare roller replacement, or simply for SEBO 8815AM, is looking at this part.
- Fitment: SEBO BALANCE A1 cordless vacuum
- SEBO part number: 8815AM
- Roller type: MultiCare
- Drawn at: position 17, BALANCE A1 parts diagram
- Mounts to: power brush 95030AM (position 15), against bearing block 8802AM (position 7)
- Companion roller: MicroCare 8816AM, position 16
- Replace when: the bristle rows have lost height, splayed or gone limp
- Genuine SEBO roller, ships in 2–5 business days