Powr-Flite Sealed Ball Bear...
$6.99
Product details
Part X8098 is a ball bearing with a rubber seal on each face. Sealed construction is what a bearing needs to survive on cleaning equipment: the rubber keeps dust and grit from working into the raceway and holds the packed grease inside, letting the bearing run through its full service life with no repacking needed.
- Part: X8098
- Style: ball bearing, individually packaged
- Seal: rubber on both faces
A bearing nearing the end of its life is rarely quiet about it. Listen for a rumble that gets louder as speed increases, feel for roughness when you turn the shaft by hand, and check for side play that should not be there. Where a shaft rides on two bearings, replace both together, since the second one has usually seen the same hours as the first.
Measure the width, outside diameter and bore of the bearing you pull before placing an order for X8098. Once a sealed bearing like this has been pressed out of its housing, plan on replacing it outright rather than reusing it, since removal often distorts the seal or the outer race even when the bearing still turns freely by hand afterward. Ships in 2-5 business days.
Verified against: Powr-Flite product page for X8098