SEBO
SEBO Screw F 3.9 x 21 (DIN 968) for ET-1 and ET-2 Power Heads
SEBO Screw F 3.9 x 21 (DIN 968) for ET-1 and ET-2 Power Heads
SKU:1020
Couldn't load pickup availability
Shipping Information
Shipping Information
We offer free standard shipping on eligible orders of $100 or more within the 48 contiguous United States. Eligibility is calculated on the merchandise subtotal after discounts and before tax.
Most in-stock orders using standard shipping are processed within 1-5 business days, and most arrive 2-11 business days after they are placed. Backordered and special-order items may take longer. Expedited UPS Ground is available at checkout for an extra charge, including on orders that qualify for free standard shipping. See our Shipping Policy for details.
Returns & Exchanges
Returns & Exchanges
Need to return an item? We’re happy to help. Eligible items may be returned by requesting authorization within 35 days of delivery. Once approved, your return must reach us within 21 days.
Return eligibility
Items must be unused, in new condition, and include their original packaging and all accessories. Machines that use water cannot be returned once unboxed, unless defective upon arrival.
Shipping and refunds
For non-defective returns, customers cover return shipping. Original shipping charges are nonrefundable. If your order included free shipping, our actual outbound shipping cost will be deducted from your refund. Eligible returns have no restocking fee.
Received a defective item?
Contact us so we can help arrange a prepaid return label and replacement.
Please review our Return & Refund Policy for complete details and exclusions.
Warranty Information
Warranty Information
All products sold by Vacuums and More come with the manufacturer's warranty. Warranty terms vary by brand and product.
With 35 years of industry experience, we stand behind every product we sell. Contact us for warranty support.
Fits the same machines
SEBO Screw F 3.9 x 21 (DIN ...
$6.99
Product details
Power heads take more punishment than the machines they hang off, with the brush roll spinning inches away and every joint shaken constantly. The F 3.9 x 21 to DIN 968 is the long screw holding that housing together on SEBO's ET-1 and ET-2. DIN 968 describes a cross-recessed pan head tapping screw with a collar, meaning a built-in flange under the head that spreads the clamping load over a wider ring of plastic than a plain pan head manages.
That flange is the reason the standard is used here. On a component that vibrates continuously, a screw head bearing on a small area works its way into the moulding until the joint has play in it again. The collar keeps the pressure spread and the joint tight for far longer.
- Part number: 1020
- Fits: SEBO power heads ET-1 and ET-2
- Specification: F 3.9 x 21 to DIN 968
- Head and drive: cross-recessed pan head with collar
- Size: 3.9 mm diameter, 21 mm long
- Sold: each
- Shorter DIN 968 screw: part 1021 at 13 mm
At 21 mm it is noticeably deeper than the 13 mm DIN 968 screw used elsewhere on the same head, and the two are easy to confuse once they are out of the casing. Put the short one where the long one belongs and the joint is only half clamped, which turns up later as a creak, a gap along the seam, or a brush housing that no longer holds its alignment.
Replace one when the recess has rounded, when it no longer draws the casing halves together, or when the original was lost during a belt or brush roll service. Unplug the machine before opening a power head and keep the screws laid out in the order they came off, because lengths are mixed within a single casing.
Searches for a SEBO ET-1 housing screw, a SEBO ET-2 power head fastener or a DIN 968 3.9 x 21 replacement all point here. Genuine SEBO hardware supplied by an authorized dealer, with dispatch in 2-5 business days.