Powr-Flite Vacuum Chamber A...
$15.99
Product details
Powr-Flite catalogs X9467 as the vacuum chamber housing for its self-contained extractors, and lists it against five machines by name: the PFX1080, PFX1080CW, PFX1080E, PFX1082E and PFX1085MAX. The chamber is the sealed housing recovery air travels through before it reaches the tank. A cracked shell, or a seal that has gone flat, turns up as weak pickup and damp carpet behind the pass.
That failure pattern is worth knowing before ordering, because a compromised chamber usually looks intact from outside. Operators tend to chase poor recovery through the hose and the wand first and only reach the chamber once those check out. Pressing on the housing near its mounting points to feel for flex, and looking at the seal face for a flattened or glazed surface rather than a springy one, narrows it down faster than swapping hoses does.
Age and the number of times a tank has been pulled and reseated wear a seal more than run hours do, so a machine emptied and refilled repeatedly through a route is a likelier candidate for a worn chamber than one used lightly on long jobs.
Order as X9467. The list above is Powr-Flite's own compatibility list, so check your machine's model plate against it, and if your unit is a variant not named there, send us the model and serial and we will confirm against the parts diagram before anything ships.
- Part: X9467 vacuum chamber housing
- Fits: Powr-Flite PFX1080, PFX1080CW, PFX1080E, PFX1082E, PFX1085MAX
- Function: seals and carries recovery airflow ahead of the tank
- Symptom of failure: weak pickup and carpet left wet after a pass
- Check first: flex near the mounting points, and a flattened seal face