TriStar A101 Canister Adapt...
$11.99
Product details
Part C-70314 bridges the connection between a Compact or TriStar canister's wand and attachments it was not originally built to accept, and it covers the A101 together with the EXL, MG1, and MG2 within that same TriStar line.
Machines in this family stay in active service for decades rather than years, and tools naturally get mixed between units bought at very different times as a household or shop accumulates them. A connector that is even a fraction of an inch off will either refuse to seat at all or sit loosely enough to leak air right at the joint, and a leak at that specific point costs suction exactly where a tool needs it most, at the very end of the airway. This adapter closes that size gap so mismatched pieces lock down with a proper seal rather than rattling loose partway through a job.
It is a small, inexpensive piece to keep on hand for anyone who has accumulated tools across more than one of these canisters over the years, since it turns what would otherwise be an unusable mismatch into a working combination. A single adapter can end up doing more to make an old tool collection usable again than replacing any one of the tools themselves would.
Fit it between the wand and the attachment the same way the original connector was installed, and check that both ends seat with a firm, even push before putting it to use. Verify the connection points on your own wand and tools before ordering, since an adapter only helps when the mismatch is one it is shaped to close.
- Part: C-70314, attachment adapter tube
- Fits: TriStar A101, EXL, MG1, and MG2
- Function: adapts the wand to accept differently sized attachments with a sealed fit
- Tip: useful for households running tools collected across more than one of these machines